Angular Chiwa equipment

 

The machine is mainly composed of discharge machine, feed platform, forming main machine, forming shear device, hydraulic station, computer control system and so on. Optional configuration of ordinary discharge machine, hydraulic discharge machine.

Main technical parameters

1. Installation size: 9500mm×1300mm×1400mm

2. Number of molding tracks: 20

3. Roller material: 45# steel

4. Roller electroplating thickness: 0.05mm

5. Cut material: Cr12

6. Molding speed: 0-10m/min.

7. Electronic control system: industrial computer PLC control

8. Inverter: accurate counting and anti-belt knife function (optional)

9. Host power: 5.5KW

10. Hydraulic station power: 3KW

11. Sheet thickness: 0.2-0.7mm

12. Sheet spread width: 1000mm Angle bending equipment (Angle bending press tile machine) is also a special equipment to the roof tile, the series of molding machine produced by the pressure plate to solve the conventional series of pressure plate roof leakage problem, the connection of the pressure plate broke the traditional roof

Kok Chi equipment is also a special equipment to the roof tile, Kok Chi III 820 this series of forming machine production of the pressure plate solves the conventional series of pressure plate roof leakage problem, the connection of the pressure plate breaks the traditional roof with bolt connection practice, the installation method adopts 45 degree lock bite installation, so that the roof waterproof effect is more intact. The press plate formed by the machine is a biting roof plate, which has high crest, high strength, screw-free locking bite installation and lap installation

Full reliability, waterproof anti-riot performance and other characteristics, and high degree of production automation, low cost, durable, light weight, assembly combination free and convenient.

 

Tel: 15690126677 (wechat same number)